전시선정기술

  • 2016년도
  • 2015년도
  • 2014년도
  • 2013년도
  • 2012년도
  • 2011년도
  • 2010년도
  • 전시회개요
  • 부스배치도
  • 역대행사결과

2011년도

Korea Invention Patent Exhibition
전시선정기술 게시글의 상세 화면
제목 광확산 폴리카보네이트(PC) 브로아 타입의 사출금형과 사출방법
분야 섬유/화학 년도 2011
업체명 푸른도시 권리번호 10-0996166 등록일 2011-11-03

  회사소개

본 업체 푸른도시는, 최근에 널리 사용되고 있는 LED 전구 등 커버로 많은 광학적인 장점이 있는 광 확산 PC(폴리카보네이트)로써는, 일반유리제품과 같이 브로아 타입(방식)으로의 제품생산을 쉽게 할 수 없어 광 효율이 좋은 백열등과 같은 글로브(구형) 형상의 제품생산에는 많은 생산비가 들고 있음에 착안을 하여 본 업체가 특허등록 한 방법으로 현재 광도(Beam Angle)가 120°-140° 밖에 되지 않는 LED 반구형상의 등 커버조사각도를 약 280° 까지 확대 할 수가 있으며, 폐사의 특허를 사용함으로서 대량생산이 가능하여 많은 생산비의 저하가 예상되고 있다. 특히 지진이 많은 일본에서는 위험한 유리 등 커버보다는 안전한 PC 등의 선호도가 높아 수출의 가능성이 대단히 높으며, 진동이 심한 선박 등의 파괴방지 및 각종 가정용 LED 등 커버를 빛의 효율이 좋고 저렴한 가격으로 대체적용을 할 수 있게 연구를 하고 있다.


  제품소개

본 기술은 기존의 중공성형(Blow Molding) 사출방법에서는 아직 적용을 하지 못하였던 코아금형을 적용하였다. 이 코아금형의 외부는 불소고무(RUBBER) 재질이다. 이 코아금형을 외부고정금속금형 속에 투입시킨 후, 코아금형의 내부로 일정한 압력으로 일정량의 가스를 주입하여, 설계된 크기로 코아금형 외부를 확장시킨 다음에, 외부고정금형과 코아금형의 설계된 간격사이로 사출, 성형하여 제품을 완성시킨다. 상기의 방법으로, 기존의 반구 형태인 2개의 제품을 서로 마주보게 하여 용접. 접합해서 생산하던 멜트 점도가 높은 PC와 같은 폴리머그룹의 재질도, 글로브형태의 제품을 치수의 안정성으로 보다 일정한 두께로 중공성형방식으로 쉽게 대량생산을 할 수가 있어, 기존의 방식보다는 많은 생산비의 절감을 예상 할 수가 있다. 또한 현재 시판되고 있는 반구 형태인 LED 전구 등 커버보다는 조사각도(Beam Angle)가 넓고 광 효율이 좋아서 단위 면적당 기존의 반구형태의 전구 5개소를 설치 할 곳에 대비하여 본 기술의 제품은 2-3개소만의 설치로써도 같은 조도의 효과를 누릴 수가 있어 에너지 절감효과를 극대화 할 수 있다.


  Company

The purundoci companies, recently widely used in LED light bulbs, etc. to cover many optical advantages of PC (polycarbonate) rosseoneun, plain glass products such as blow type of production makes it easy to do light-efficient light bulb Globe-shaped products such as the carrying cost of production has a lot of the companies in the patent and conceived of as a way to present two120 ° -140 ° Beam Angle LED does not only cover the investigation, including on a hemispherical angle extends to approximately 280° not do, and our use of the patent can be mass produced by the degradation of many production costs are expected.Inparticular,Japanhas many earthquakes, rather than risk a secure PC, such as glass and cover the possibility ofexportinghighaffinityveryhigh, and destruction of such vessels to prevent excessive vibration, and various house hold LED light, efficient, and inexpensive alternative to Apply do not do a lot of dem and can before cast.


  Invention information

The technology of the conventional injection blow molding methods not yet applied the core mold was not applied. Two cores of the fluorine rubber is out side of the mold. Two core mold, external fixed metal mold in the injection and then, core mold into the interior of the constant pressure, a certain amount of gas injected, the designated size core mold exterior extension, then, the outside of the fixed mold and the core of the mold design gap between injection molding makes the finished product. By the way, the two existing products in the form of a hemisphere facing each other by welding. Was produced by bonding a high melt viscosity of the material such as a PC Polymers Group, Globe in the form of dimensional stability of the product with more uniform thickness, blow molding the way can you be easily mass-production, production cost savings of more than the traditional approach can be expected to do. In addition, LED light bulbs currently on the market, including the form of semi-than cover the wide beam angle per unit area blessed with an optical efficiency of the existing form of semi-bulb compared to 5 places where you need to install the products of this technology by installing the 2-3 places only pilots benefit from the same number of illumination to maximize energy savings, it can be.

전시선정기술 게시판의 이전글 다음글
이전글 이전글 음식물쓰레기처리장치
이전글 다음글 시멘트 혼입 폴리머계 도막방수제 및 그 제조방법
서울시 강남구 테헤란로 131(역삼동 647-9) 한국지식재산센터 18층
TEL : 02)3459-2792, 2794, 2845, 2793  FAX : 02)3459-2799  EMAIL : 519@kipa.org
사업자 등록번호 : 214-82-04275